The production process of twisted pigtail car towels mainly includes the following steps:
1. Raw material preparation
Material selection: The selection of high-quality cotton, microfiber and other good water absorption, soft materials.
Inspection: To ensure that the raw materials are free of impurities and pollution-free.
2. Spinning
Loosen: Loosen the fiber to remove impurities.
Carding: Further carding the fibers so that they are arranged in parallel.
Combining: Combing fibers together to form even slivers.
Roving: Drawing and twisting slivers to make roving.
Fine yarn: Further stretched and twisted to form fine yarn.
3. Twist
Twisting: Twisting of fine yarn to increase strength and wear resistance.
Setting: Stabilizing twist by heat treatment.
4. Weaving
Warping: Arrange the yarn on the warp shaft according to the process requirements.
Weaving: The use of a loom to weave the warp and weft into a towel fabric.
5. Dyeing and post-treatment
Dyeing: Dyeing as required to ensure even color.
Cleaning: Remove floating colors and impurities.
Soft treatment: Use softener to enhance the feel.
Drying: Dry towels and control water content.
6. Cut and sew
Cut: Cut the towel cloth to size.
Sew: Sew the edges to prevent straying.
7. Quality inspection
Inspection: Check size, color, sewing quality, etc.
Packaging: Qualified products are packaged and ready for delivery.
8. Delivery
Storage: The packaged towels are stored in the warehouse.
Shipping: As per order.
Critical control point
Raw material quality: Ensure fiber quality.
Twisting process: control twist to ensure strength.
Dye uniformity: Ensure consistent color.
Sewing quality: prevent straying.
Through these steps, the quality and performance of the twisted plaited car towel are ensured.
Post time: Mar-04-2025